USER MANUAL 2.2 | B-EASYCONNECT
Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen |
22
5.1.4 Operation as WLAN Client Mode
– with activated DHCP
Fig. 6: Operation as WLAN-Client Mode
– with activated DHCP
1. Enter the parameters of the WLAN network to which the gateway or controller is to connect.
A connection can only be established if the network has been set up with WPA2 encryption.
2. IMPORTANT: Select the WLAN country according to the operating location!
3. DHCP Mode - the gateway (client) receives an IP address from the access point via DHCP.
4. Apply and save the configuration - the settings are active after a restart of the controller.
