USER MANUAL 2.2 | B-EASYCONNECT
Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen |
18
HDMI
The connector is covered with a protective cap and without function
Micro SD-card slot
Module is delivered with inserted micro SD card with Berghof application and operating system
LED
The EasyConnect gateway offers as simple diagnosis via the LED available on the EasyConnect
and via the web interface of the controller.
The following operation states are indicated
•
LED off
-> EasyConnect not powered or no SD card
•
LED on
-> EasyConnect powered and application is running
•
LED blinking irregular
-> device is booting
•
LED blinking 2 seconds
-> SD-card does not match with EasyConnect gateway
•
LED fast blinking (20 Hz)
-> connection could not established to plc with USB
•
LED slow blinking (1 Hz)
-> Startup and configuration of EasyConnect software
4.5 Requirements for operation
The following conditions must be met for operation of the B-EasyConnect with a compatible Berghof
controller:
The corresponding micro SD card is inserted in the EasyConnect device.
The operating device is connected to a free USB socket of the controller
The device is connected to the controller via the supplied USB connection cable.
The corresponding USB-License is activated with the Berghof controller
