USER MANUAL 2.2 | B-EASYCONNECT
Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen |
10
1.6 Handling of device
The device is susceptible to impacts, heavy vibration, moisture and extreme temperatures.
1.6.1 Transport and storage
Protect the device against major mechanical stresses during transport.
Always pack the device in its original packaging for transport.
For storage, refer to the applicable statement of ambient conditions (see section: "Technical
Data").
Protect the device against condensation and damp.
1.6.2 Operation
If the device has been stored or transported in cold weather or under conditions or large fluctua-
tions in temperature, do not start to operate it until it has acclimatized to room temperature for the
place it is used.
If condensation is present, wait at least 12 hours before starting to operate the device.
1.6.3 Unpacking
On delivery of the device, a check must be made that it is complete and undamaged.
Check the packaging for external damage.
If the packaging is seriously damaged or if damage to the contents is evident: Do not proceed
further with opening the packaging, instead immediately inform the transport company and your
supplier.
Remove the packaging and keep it safe for subsequent transport.
Check the contents for evidence of damage in transport.
Check the contents for completeness against the order documentation and keep all the delivery
documentation for future reference. The delivery documentation contains important information
about the device and is part of the product.
If you discover damage in transport, or if the equipment delivered does not match the order: Inform
the supplier immediately.
