Air Jack Auto Lift
Safety and using precautions
1.
The Air Jack auto lift has a lifting capacity of max. 3 tons. Do not lift heavier cars - danger of
accidents!
2.
Pay attention to block the non-lifted wheels, so that the car can`t move (Parking brake, brake
block etc. - pay attention of your car documentation).
3.
Do not touch parts of the exhaust pipe - danger of burn! Pay attention by hoisting the adapter
over over the tailpiece of the exhaust pipe - do not touch the exhaust parts!
Pay attention - the Air Jack auto lift and the protective mats mustn`t touch parts of the exhaust
pipe.
4.
The Air Jack auto lift mustn`t used as car lift to repair or inspect the car etc. - danger of
accidents!
Do not laying under the lifted car!
5.
Let the gas out of the balloon, so that you and other persons can`t breathe the gas - danger
of toxication!
6.
Do not use the Air Jack auto lift in closed rooms - danger of toxication!
7.
Keep other persons away from the car by using the Air Jack auto lift.
8.
Use the supplied protective mats to avoid damaging the Air Jack auto lift by sharp or spiky
things on the ground or on the car. Danger of accident by bursting the balloon!
9.
Do not use the Air Jack auto lift at cars with a double exhaust pipe. It can damage the
exhauster.
10. Use the Air Jack auto lift only on one-pipe exhausters with diameter up to 65 mm. You can
use it also on oval pipes, when the rubber cone end of the hose can fixed to them, eg. oval
pipe of 30 x 60 mm.
Preparation to lift your car
1. Take the air jack out of the carrying bag, unfold it at first. Place one of the protective
mats directly onto the ground where the car should be lifted. Spread the deflated
air jack under the car onto the prtective mat. Place the other protective mat onto
the air jack to avoid any sharp objects on the underside of the car puncturing the
air jack.
Pay attention to block the non-lifted wheels, so that the car can`t move (Parking
brake, brake block etc. - pay attention of your car documentation).
2. Connect the hose adapter to the connecting piece of the air jack and fix it by
turning clockwise.
3. Put the black rubber funnel over your exhauster.
4. Start car engine and let it run. The exhauster gas will inflate the air jack and lift the
car.
Attention
Do not inflate the jack to full capacity in order to avoid explosion. The best
way to do is 80%.
5. Once the desired height is reached (wheels have no ground contact) remove the
rubber funnel from the exhauster. A valve inside the air jack will not allow the air
jack to deflate.
6. To deflate the air jack after repair disconnect the hose tube from air jack by easily
turning counterclockwise and metered deflating. Do not loosening the hose tube
completely before the jack is completely deflated und the car is completely lowered
to the ground. The air jack may be prompt releasing - danger of accident!
GB
