Bergen Intrepid Magnum Tazer, Manual, Page: 36 / 88

If necessary to space the arm away from the hub, place 2 brass washers on
the bolt between the bearing and the hub. Slide the washout unit on to the
mainshaft and snap the radius links onto 2 of the balls on the inner
swashplate.
Now the explanation of the alternate links.
Line up the balls that you snapped the radius links onto with the outer
balls of the swashplate, preferably the ones to the sides. Look at the
flybar, noting the angle, that it is NOT pointing straight out away from
the heli. This is the "retarded" setting, and in general, gives you a more
stable hover and less cyclic action.
If you opt to use the other links, then your assy will look like this. Note
the washout arms are flipped over and the bolt is installed in the other
hole. Now if you line up the swashplate balls and look at the flybar.