Beper 90.354, Use Instructions

Page: 10 / 28

10
Milk warmer Use instructions
To maintain efficient functioning of the appliance, it is advisable to remove any lime scale deposits
that may build up as follows: prepare a solution of 100ml vinegar and 200ml cold water and pour
this into the chamber. Leave the solution inside the chamber for about 30 minutes, or long enough
to eliminate the lime scale deposits. Then empty the tank and dry thoroughly with a non-abrasive,
moist cloth.
IMPORTANT NOTICE
This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience or knowledge, unless they have been given supervision
or instruction concerning the use of the appliance by a person responsible for their safety. Children
should be supervised to ensure they do not play with the appliance. If the power cord is damaged it
must be replaced by the builder or by its technical service or, in any case, by a person holding similar
qualification in order to avoid whatsoever hazard.
TECHNICAL SPECIFICATIONS
Home use
Power: 100W
Voltage: 220/240V – 50/60Hz
Car use
Power: 60W
Voltage: 12V DC
For any improvement reasons, Beper reserves the right to modify or improve the product
without any notice.
The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE),
requires that old household electrical appliances must not be disposed of in the normal
unsorted municipal waste stream. Old appliances must be collected separately in order to
optimize the recovery and recycling of the materials they contain, and reduce the impact on
human health and the environment. The crossed out “wheeled bin” symbol on the product
reminds you of your obligation, that when you dispose of the appliance, it must be separa-
tely collected.