Beny Sports Herculean V-FIT STG/09-2, Manual

Page: 19 / 28

5
4
25
23
23
8
35
31
24
34
7
11
60
76
76
61
76
76
82
82
71
78
84
80
64
64
77
77
77
77
77
77
83
83
83
62
62
1. Attach the Press Frame Stop Adjuster (35) to the Support Frame (8).
2. Securely attach but do not overtighten the Single Pulley Blocks (23) to the
Support Frame (8), using two M10 x 65mm Hex Bolts (64), four M10 Washers
(77) and two M10 Nylon Nuts (83).
3. Attach the Seat Base Frame (4) and Plate (25) to the Support Frame (8) at the
desired height using the two M10 x 75mm Hex Bolts (62), four M10 Washers
(77) and two M10 Nylon Nuts (83).
4. Attach the Leg Extension Frame (5) to the Seat Base Frame (4), using one
M12 x 75mm Hex Bolt (61), two M12 Washers (76) and one M12 Nylon Nut (82).
NOTE: Oil Bushing (small) (34) have been pre-installed into Upper Cross Beam (7).
5. Attach the Press Bar (11) to the Upper Cross Beam (7), using one M12 x 135mm
Hex Bolt (87), two M12 Washers (76) and one M12 Nylon Nut (82).
6. Attach the Press Frame Lock Bolt (24) to the Support Frame (8), using one
M8 x 40mm Hex Bolt (71), two M8 Washers (78) and one M8 Nylon Nut (84).
7. Slide the Washer (¢30 x ¢10) (80) and Press Frame Lock Knob (31) onto the
Press Frame Stop Bolt (24) ensuring that the Washer is located between the
Knob and the Press Bar when secured.
4.
Page 1