Beny Sports Herculean V-FIT STG/09-2, Manual

Page: 17 / 28

2.
1. Slide nine Weight Plates (36) carefully down the Weight Guide Tubes (15).
2. Fit the Selector Shaft Bushing (40) to the Selector Shaft (6) at the first
open hole, locating with the Selector Shaft Pin (38).
3. Insert the Selector Shaft (6) into the centre hole of the Weight Plates (36).
4. Slide the Top Weight Plate (37) down the Weight Guide Tubes (15) then
insert the Weight Selector Pin (41) into the hole of the desired weight.
5. Place the Plastic Washer (39) on the Selector Shaft (6) in the Top Weight
Plate (37).
6. Attach two Stop Blocks (19) to the small holes drilled near the top of the
Weight Guide Tubes (15), using two M6x40mm Hex Bolts (74), four M6
Arc Washers (79) and two M6 Nylon Nuts (85).
Page 1