7
Bentone BG550/650
General
• Check that the burner is approved for the intended grade of gas and
connection pressure.
• No safety systems on the burner may be disconnected.
• The installer must ensure that the boiler room has suficient fresh air
ventilation as per local norms.
• Gas leak checks should be carried out on installation and servicing to
avoid a gas leak and the associated hazards and risks.
• Before servicing, shut off the fuel supply and turn off the power to the
burner.
• The surface temperature of the burner’s components may exceed
60°C.
• Be careful when servicing: there may be a risk of pinching.
• Ensure that the burner is protected against direct spraying of water,
since it is not designed to withstand this.
• Only spare parts recommended by Enertech should be used.
• This burner cannot be used for biogas without irst contacting
Enertech.
• If the boiler has a door that opens, this should be locked with a door
switch.
Delivery check
• Make sure everything is delivered and the goods have not been
damaged during transit.
• If something is wrong with the delivery, report it to the supplier.
• Transport damage must be reported to the shipping company.
