Bentone B45-2 RME, Installation And Maintenance Instruction

Page: 22 / 40

22 Bentone B45-2 RME
For installers
5.2 Servicing air dampers
Removal and installation
1. Break the main current and disconnect the Euro plugs from the burner.
2. Loosen the nuts (H) and pull the burner backwards.
3. Remove the intake grille at the air intake.
4. Disconnect the damper motor.
5. Clean the air damper (J) and the intake. Lubricate any damper shaft.
6. Reconnect the damper motor.
7. Install the intake grille for the air intake.
8. Press the burner together and lock using the nuts (H).
9. Fit the Euro plugs and turn on the main current.
10. Check combustion *.
Note:
* When servicing/replacing components that affect combustion, an
analysis and soot test shall be carried out on the installation.
H
H
J