Bentel Security BGSM-G, Manual

Page: 29 / 32

BGSM-G
29
G G G G G
Status Page
This page will allow you to monitor and control in real-time all the Device functions and, if not previously done, unblock the SIM CARD PIN.
, , , , ,
ATTENTION: This page is updated every 5 seconds.
Status section
This section shows the GSM Module data. This virtual display shows the GSM Network Provider, the Device battery charge (for the
precise level, position the mouse arrow on the battery icon for a several seconds) and GSM signal reception (indicated by 10 bars).
The virtual
Comunication LED is usually GREEN. It will turn RED in the event of a breakdown in communication between the software
and this Device. If it turns AMBER, this Device is either reading the SIM CARD or receiving/making a telephone call, under these
circumstances the status update will be suspended temporarily.
Inputs section
This section shows the status of each of the 4 Inputs (GREEN LED = Input balanced; RED LED = Input Unbalanced) and any Special
functions associated with the Inputs.
Outputs section
This section shows the status of each of the 4 Outputs (GREEN LED = Output in standby; RED LED = Output activated). If any of the
Outputs has been set up as “Reserved” (refer to “Outputs page”), RED LED On,
it will be possible to activate/deactivate the Outputs
in real-time by right-clicking the respective Polarity option and selecting the Activate/Deactivate sub-option.
Events section
This section shows the events as they occur (RED LED On).
Send next periodic message on
This section shows the Date and Time of the next periodic SMS text message (refer to the SMS dialer page).
Send next periodic report on
This section shows the Date and Time of the next periodic Contact ID report (refer to the Contact ID Communicator page).
Clear call queue
This button will allow you to interrupt any ongoing calls and stop the outgoing call queue.
, , , , ,
This option is available ONLY when this Device operates in SMS Dialer/Contact ID Communicator mode.
INFORMATION FOR THE USER
GSM Network Calls
If this Device is connected to a telephone, it will be possible to make calls on the GSM Network.
Further Information
Refer to the following sections for further information:
„
STATUS LEDs
„
OPERATING PRINCIPLES
„
ACTIVATING THE OUTPUTS