Benstone Fieldpaq, User Manual

Page: 64 / 222

P
ag
e
63
Max Speed : Enter the maximum Speed you expect the rotor to go. This value is
used for calculating the Maximum residual unbalance according to ISO 1940.
Rotor Mass (kg): Enter the weight of the rotor.
Diameter P1 : Enter the diameter of Plane 1.
Diameter of P2 : Enter the diameter of Plane 2.
Local Soft Key Menus : Back, Save to Default, Load Default, Next
Back : Returns you to the previous screen.
Next : Moves you to the next screen.
Save to Default : Pressing this function button, will save the current setup file to
a default setup that will be available the next time.
Load default : Load a previously saved setup.
After you press the [ Next] button, you should
see a display as follows. Notice in the
window, that the instructions are to Start
rotor. Press “Start” to read data . At this
time, you press the [ Start button ] (zero key)
on the Fieldpaq to begin the measurement.
Balancing a
rotor is an
interactive
measurement.
There are
several steps
with
balancing, and we have comments at the bottom
of each screen to prompt the user to the next step.