Benstone Fieldpaq User Manual Download Page 183

Page: 183 / 222

182

Indicators explained:

Playback indicator showing the playback position

relative to the total amount of raw data recorded.

Playback Speed and overlapping information.

1x with 75% overlap, 2x with 25% and 4x with 75%

overlap. To change the overlap, you can press

[

Return

] and select [

Display

] [

Overlap

] and select the

desired amount of overlapping percentage

Battery Charge State Indicator

Rewind Pause/ Play and Fast Forward 1X, 2X, 4X, or

8X Speed: Pressing the fast forward button will toggle

between 1X, 2X, 4X, 8X and then back to 1X speed.

This is useful to fast forward to an interesting point in

your raw data.

Return: Returns back to the previous menu.

Summary of Contents for Fieldpaq































































































































































































































Search results

Summary of Contents for Fieldpaq

Reviews:

Related manuals for Fieldpaq

Brands by name

Popular brands

Benstone Fieldpaq, User Manual

Search results

Summary of Contents for Fieldpaq

Reviews:

Related manuals for Fieldpaq

Brands by name

Popular brands