Remote control
6
Using the BenQ IFP by remote control
1. Insert the enclosed dongle into BenQ IFP’s USB port.
2. You can activate functions on the screen once the remote control is connected to its
enclosed dongle as a receiver.
3. For detailed function of each button, please refer to
.
Pairing the remote control and the enclosed dongle
If you are experiencing issues using the function key on the remote control, please follow
the steps and pair again the remote control to resolve the issue:
1. Insert the enclosed dongle to IFP’s USB port and place the remote control near it.
2. Press the
and
at the same time, and the indicator light starts flashing.
3. The pairing is completed once the indicator stops flashing.
Remote control usage tips
• To power on/off the display, aim the top front of the remote control directly at the display’s
remote control sensor window when you press the buttons.
• Avoid getting the remote control wet or store it in humid environments (like bathrooms).
• If the display’s remote control sensor window is exposed to direct sunlight or strong light,
the remote control may not operate properly. In this situation, change the light source,
readjust the angle of the display, or operate the remote control from a location closer to
display’s remote control sensor window.
Dongle
