Operation
59
5. System
Setup: A
d
vanced
men
u
High Altitude
Mode
A mode for operation in high altitude areas. See
altitude environment" on page 42
for details.
Audio Settings
See
"Adjusting the sound" on page 42
for details.
Mute
Sets the mute function.
Volume
Adjusts the audio volume level.
Microphone volume
Adjusts the microphone sound level.
Power on/off Ring Tone
Sets the power on/off ring tone.
Lamp Settings
Lamp Mode
See
"Setting Lamp mode as Economic or SmartEco" on page 63
for
details.
Reset lamp timer
See
"Resetting the lamp timer" on page 68
for details.
Lamp Timer
S
"Getting to know the lamp hour" on page 63
for details on how
the total lamp hour is calculated.
Security
Setting
Change Password
You will be asked to enter the current password before changing to a
new one. See
"Utilizing the password function" on page 30
for
details.
Change Security Settings
Power On Lock
When
Power On Lock
is activated, you will be asked to enter the
current password before powering on the projector.
If you enter incorrect password 5 times in succession, the projector
will automatically shut down in a short time.
Baud Rate
Selects a baud rate that is identical with your computer’s so that you
can connect the projector using a suitable RS-232 cable and update
or download the projector’s firmware. This function is intended for
qualified service personnel.
HDMI
Equalizer
Select HDMI equalizer value.
Test Pattern
Selecting
On
enables the function and the projector displays the grid
test pattern. It helps you adjust the image size and focus and check
that the projected image is free from distortion.
FUNCTION
DESCRIPTION
