Operation
45
If the IP Address still does not display, contact your ITS administrator.
8.
Go back to
System Setup: Advanced
>
Network Settings
page.
9.
Press
▼
to highlight
AMX Device Discovery
and press
◄
/
►
to select
On
or
Off
.
When
AMX Device Discovery
is
On
, the projector can be detected by AMX
controller.
If you are in a non-DHCP environment:
1.
Repeat steps 1-4 above.
2.
Press
▼
to highlight
DHCP
and press
◄
/
►
to select
Off
.
3.
Contact your ITS administrator for information on the
IP Address
,
Subnet Mask
,
Default Gateway
, and
DNS Server
settings.
4.
Press
▼
to select the item you want to modify and press
MODE/ENTER
.
5.
Press
◄
/
►
to move the cursor and then press
▲
/
▼
to enter the value.
6.
To save the setting, press
MODE/ENTER
. If you do not want to save the setting,
press
MENU/EXIT
.
7.
Press
▼
to highlight
Apply
and press
MODE/ENTER
.
8.
Press
MENU/EXIT
to return to
Network Settings
page, press
▼
to highlight
AMX Device Discovery
and press
◄
/
►
to select
On
or
Off
.
9.
Press
MENU/EXIT
to exit the menu.
