Introduction
12
Remote Control
1.
ON /
OFF
Toggles the projector between standby
mode and on.
2.
Source selection buttons
Selects an input source for display.
3.
Keystone/Arrow keys (
/
▲
Up,
/
▼
Down)
Manually corrects distorted images
resulting from an angled projection.
4.
MENU/EXIT
Turns on the On-Screen Display (OSD)
menu. Goes back to previous OSD
menu, exits and saves menu settings.
5.
◄
Left/
Decreases the projector volume.
6.
ECO BLANK
Used to hide the screen picture.
7.
LASER
Emits visible laser pointer light for
presentation purposes.
8.
MHL control buttons
Goes to the previous file/Plays/Pauses/
Goes to the next file/Rewinds/Stops/
Fastforwards during media playback.
Only available when controlling your
smart device in MHL mode.
9.
ZOOM+/ZOOM-
Magnifies or reduces the projected
picture size.
10. ASPECT
Selects the display aspect ratio.
11. FREEZE
Freezes the projected image.
12. NETWORK SETTING
Displays the
Network Settings
OSD
menu.
13. Numeric buttons
Enters numbers in network settings.
Numeric buttons 1, 2, 3, 4 cannot be
pressed when asked to enter password.
14. NETWORK
Not available for this projector.
15. AUTO
Automatically determines the best
picture timings for the displayed image.
When there is no OSD menu and at
MHL source, long press for 3 seconds to
switch between MHL mode and DLP
mode on remote control for MHL keys.
ADVANCETECH CO., LTD(FACTORY) Model No.: SN1407029
11/F-1, No.120, Qiaohe Rd., Zhonghe Dist., New Taipei City
23584, Taiwan, R.O.C.
Complies with 21 CFR 1040.10 and 1040.11 except
for deviations pursuant to Laser Notice No.50,
dated June 24,2007
