BenQ SH753, User Manual

Page: 56 / 81

Operation 56
2. Picture
men
u
Picture Mode
Pre-defined picture modes are provided so you can optimize your
projector image set-up to suit your program type. See "Selecting a
picture mode" on page 36 for details.
Reference
Mode
Selects a picture mode that most suits your need for the image
quality and further fine-tune the image based on the selections listed
on the same page below. See "Setting the User 1/User 2 mode" on
page 37 for details.
Brightness
Adjusts the brightness of the image. See "Adjusting Brightness" on
page 37 for details.
Contrast
Adjusts the degree of difference between dark and light in the image.
See "Adjusting Contrast" on page 37 for details.
Color
Adjusts the color saturation level -- the amount of each color in a
video image. See "Adjusting Color" on page 37 for details.
The function is only available when Video or S-Video with NTSC
system is selected.
Tint
Adjusts the red and green color tones of the image. See "Adjusting
Tint" on page 37 for details.
The function is only available when Video or S-Video with NTSC
system is selected.
Sharpness
Adjusts the image to make it look sharper or softer. See "Adjusting
Sharpness" on page 37 for details.
The function is only available when Video or S-Video with NTSC
system is selected.
Brilliant Color
Adjusts white peaking while maintaining correct color presentation.
See "Adjusting Brilliant Color" on page 37 for details.
Color
Temperature
See "Selecting a Color Temperature" on page 38 for details.
Color
Temperature
Fine Tuning
See "Setting a preferred color temperature" on page 38 for details.
3D Color
Management
See "3D Color Management" on page 38 for details.
Reset picture
settings
See "Resetting current or all picture modes" on page 39 for details.
FUNCTION DESCRIPTION