![background image](http://html1.mh-extra.com/html/benq/se0224/se0224_user-manual_2734435021.webp)
2 *+,-0
2 *+,-0
2 *+,-0
2 *+,-0
& '( !
& '( !
& '( !
& '( !
Like the case in data rate setting, duplex mode setting is only changed when
the corresponding port's auto-negotiation function is disabled. Press [D]
from the main menu to enter this setting. For example: to set port 4 to half
duplex mode, refer to the following figure.
)* !
)* !
)* !
)* !
User can set flow control capability for each RJ-45 port. Press [F] from the
main menu to enter this setting. The default setting for flow control
capability is enabled. For example: to disable port8's flow control capability,
refer to the following figure.