Last revised: May 17, 2013
1
Chapter 1
Chapter 1
Chapter 1
Chapter 1 General Information
General Information
General Information
General Information
1.1 Introduction
The following is the product installation guide for ZEP compatible BenQ Solar photovoltaic
modules.
Please read these instructions in entirety before using this product in any way. Failure to
comply with the installation instructions within this document can void the BenQ Solar
Limited Warranty for this product.
See BenQ Solar Limited Warranty document for full product warranty details and limitations.
IMPORTANT
IMPORTANT
IMPORTANT
IMPORTANT
PLEASE NOTE:
PLEASE NOTE:
PLEASE NOTE:
PLEASE NOTE: WARRANTY IS VOID IF NON
WARRANTY IS VOID IF NON
WARRANTY IS VOID IF NON
WARRANTY IS VOID IF NON----ZEP CER
ZEP CER
ZEP CER
ZEP CERTIFIED HARDWARE IS
TIFIED HARDWARE IS
TIFIED HARDWARE IS
TIFIED HARDWARE IS
ATTACHED TO GROVE IN MODULE FRAME.
ATTACHED TO GROVE IN MODULE FRAME.
ATTACHED TO GROVE IN MODULE FRAME.
ATTACHED TO GROVE IN MODULE FRAME.
1.2 Product Certifications and UL Listing Information
This product meets or exceeds the requirements set forth by UL1703 for PV Modules. This
UL1703 Standard covers flat-plate PV modules intended for installation on buildings and those
intended to be freestanding. To satisfy the listing for this product the modules must be
mounted with a rack or standoff structure. It does not include integration into a building
surface because additional requirements may apply. This product is not intended for use
where artificially concentrated sunlight is applied to the module.
1.3 Disclaimer of Liability
Please follow all relevant Industry Best Practices when handling, installing, and using this
product. This guide is designed for use by trained and certified solar professionals only.
BenQ Solar does not assume responsibility for loss, damage or expense resulting from
installation, handling or use of this product.