![background image](http://html1.mh-extra.com/html/benq/pdp46w1-46w1-46-plasma-panel/pdp46w1-46w1-46-plasma-panel_user-manual_2734272024.webp)
8. Basic
Operation:
8.1 Power ON/OFF: The operation is in Standby mode:
Press the “POWER’ key to turn on the Display. The power
indicator changes from red to green.
Press the “
POWER
” key in the Start state to turn off the Display.
The power indicator changes from green to red.
(Note: The power indication flashes for a few seconds before switching
the color.)
8.2 Selection of Input Mode:
Press the “INPUT” key. The “OSD Menu” of input signal sources
appears. Use the “
▲
/
▼
” keys to select the signal source you want
and press “
►
” to confirm the selection.
Your may also press the “
INPUT
” key repeatedly to select the signal
source you want. The signal sources are displayed in the following
sequence (depending on the module, the sequence might be
different):
Where:
1. PC Module:
2. PC Video Module:
3. PC Enhanced PC Module:
RGB 1: Analog D-SUB input on PC module.
RGB 2: Digital DVI-D input on PC module.
RGB 3: Analog D-SUB input on enhanced PC module.
RGB 4: Digital DVI-D input on enhanced PC module.
統一翻譯
C:\pdp
事務
\User Menu\UM_BenQ.doc 5/30/2002 8:42 PM
Wuys
23