2. Insert two No. 4 batteries in the remote controller as shown in the above
figure.
3. Re-assemble the cover in a reversed procedure and confirm the fastener of the
cover has fixed in the right position.
6.4.3 Scope of Remote Control:
Point to the remote controller to the remote control window (i.e. the window
showing the power indication) of the Display to receive the signals
transmitted from the remote controller.
No obstacles shall be placed between the remote controller and the remote
control window.
The effective receiving scope of the signals is 6 meters to the front of the
remote control window, each 30
°
to the left and right sides and each 20
°
to
the top and bottom of the Display.
6.4.4 Use of Remote Controller:
1. To ensure a normal operation, the remote controller shall not be stricken or
fall on the ground. It shall also be kept dry and away from heat sources.
2. Don’t wipe the remote controller with wet cloth moistened with volatile
solvent, such as benzene or thinner.
3. When the response of the Display becomes abnormal, check whether the
energy of the batteries is too weak.
統一翻譯
C:\pdp
事務
\User Menu\UM_BenQ.doc 5/30/2002 8:42 PM
Wuys
18
