![background image](http://html1.mh-extra.com/html/benq/pdp46w1-46w1-46-plasma-panel/pdp46w1-46w1-46-plasma-panel_user-manual_2734272007.webp)
The power cable shall be kept away from heat
sources:
The heat produced by any heat source may fuse the
covering of the power cable.
Hold the power connector when remove the
power cable:
Pulling the power cable may damage the wires inside the
cable and cause fire or electric shock.
Don’t touch the connector with wet hands:
Electric shock may be caused in this case.
Unplug the comector
ATTENTION
Insert batteries in accordance with
instructions:
Insert the batteries with correct polarities (po and
negative -). Incorrect polarities may case breakage and
leakage of the batteries, hurt operators and contaminate
the remote controller. Don’t charge the batteries
attached with the product to avoid any risk.
Don’t put any object on the vents:
Blocking the vents may raise the internal temperature and
make the housing hot or cause fire.
Touching the hot housing may hurt operators. Don’t
install the product in a place with narrow space or bad
ventilation. Don’t cover the vents with towels, blankets
or dusters.
When the product is unused for a long time:
Unplug the power connector and other plugs when the
product will not be used for a long time.
Unplug the connector
統一翻譯
C:\pdp
事務
\User Menu\UM_BenQ.doc 5/30/2002 8:42 PM
Wuys
6