![background image](http://html1.mh-extra.com/html/benq/pdp46w1-46w1-46-plasma-panel/pdp46w1-46w1-46-plasma-panel_user-manual_2734272015.webp)
6.3 Rear
View:
(1) Speaker Connection Terminals: Each one set of speaker connection terminals on the
left and right sides is used to connect to the speaker with more than 10W and 8
Ω
.
(2) Fixed Seat.
(3) Four tapped holes for the fixed seat: Use the standard screws to fix the seat.
(4) Four tapped holes for the wall hanger (optional): Use the standard screws to fix the
wall hanger.
(5) Transport handles: Use the handles to facilitate the transport. When wall hanger is
used, the handles shall be removed before install the Display onto the wall hanger.
(6) Four tapped holes for the laud speakers: Use the standard hangers and screws to fix
the optional standard laud speakers.
(7) Signal input terminals: They are used to connect to input devices. Depending on
the selected modules, there are three combinations available for selection:
Simple PC Module
A. D-SUB: Connects to the D-SUB 15 PIN analog output connector of the PC
display card. The Display is used as a PC monitor.
B. DVI: Connects to the DVI-I digital output connector of the PC display card.
The display is used as a PC monitor.
C. RS-232: Is a D-SUB 9 PIN male terminal used as a port for serial
communication.
統一翻譯
C:\pdp
事務
\User Menu\UM_BenQ.doc 5/30/2002 8:42 PM
Wuys
14