Operation
31
7.
A confirmation message displays. Highlight
Yes
and press
MODE/ENTER
on the
projector or remote control to confirm. You will see the message “
Timer is On
”
displaying on the screen. The timer starts counting when the timer is on.
To cancel the timer, perform the following steps:
1.
Go to the
SYSTEM SETUP: Basic > Presentation Timer
menu and highlight
Off
. Press
MODE/ENTER
. A confirmation message displays.
2.
Highlight
Yes
and press
MODE/ENTER
to confirm. You will see the message
“
Timer is Off
” displaying on the screen.
Remote paging operations
Connect the projector to your PC or notebook with a USB cable prior to using the paging
function.
See
"Connection" on page 16
for details.
You can operate your display software program (on a connected PC) which responds to
page up/down commands (like Microsoft PowerPoint) by pressing
PAGE +/PAGE -
on
the remote control.
If remote paging function doesn't work, check if the USB connection is correctly made and
the mouse driver on your computer is updated to the latest version.
The remote paging function cannot work with Microsoft
®
Windows
®
98 operating system. Windows
®
XP or
higher operating systems are recommended.
Freezing the image
Press
FREEZE
on the remote control to freeze the image. The word “
FREEZE
” will
display in the upper left corner of the screen. To release the function, press any key on the
projector or remote control.
If your remote control has the following keys, please note that they cannot be pressed to release the function:
LASER
,
PAGE +/PAGE -
,
NETWORK
.
Even if an image is frozen on the screen, the pictures are running on the video or other
device.
Hiding the image
In order to draw the audience's full attention to the presenter, you can use
ECO BLANK
on the projector or remote control to hide the screen image.
You can set the blank time in the
SYSTEM SETUP: Basic
>
Operation Settings
>
Blank Timer
menu to let the projector return the image automatically after a period of
time when there is no action taken on the blank screen.
If the preset time spans are not suitable for your presentation, select
Disable
.
No matter
Blank Timer
is activated or not, you can press most of the keys on the
projector or remote control to restore the picture.
Do not block the projection lens from projecting as this could cause the blocking object to become heated and
deformed or even cause a fire.
