Operation
52
5. System Setup: Advanced
men
u
Baud Rate
Selects a baud rate that is identical with your computer’s so that you
can connect the projector using a suitable RS-232 cable and update
or download the projector’s firmware. This function is intended for
qualified service personnel.
Test Pattern
Selecting
On
enables the function and the projector displays the grid
test pattern. It helps you adjust the image size and focus and check
that the projected image is free from distortion.
Closed
Caption
Closed Caption Enable
Activates the function by selecting On when the selected input signal
carries closed captions.
• Captions: An on-screen display of the dialogue, narration, and
sound effects of TV programs and videos that are closed
captioned (usually marked as "CC" in TV listings).
Caption Version
Selects a preferred closed captioning mode. To view captions, select
CC1, CC2, CC3, or CC4 (CC1 displays captions in the primary
language in your area).
Standby
Settings
Network
Selecting On enables the function. The projector is able to provide
the network function when it is in standby mode.
Monitor Out
Selecting On enables the function. The projector can output a VGA
signal when it is in standby mode and the COMPUTER 1 jack is
correctly connected to devices. See
"Connection" on page 20
for how
to make the connection.
Audio Pass Through
The projector can play sound when it is in standby mode and the
corresponding jacks are correctly connected to devices. Press
/
to choose the source that you wish to use. See
"Connection" on page
20
for how to make the connection.
Enabling this function slightly increases the standby power consumption.
Network
settings
Wired LAN
AMX Device Discovery
When
AMX Device Discovery
is
On
, the projector can be
detected by AMX controller.
MAC Address
Displays the mac address for this projector.
Reset All
Settings
Returns all settings to the factory preset values.
The following settings will still remain:
Position
,
Phase
,
H. Size
,
Projector Installation
,
Language
,
High Altitude Mode
,
Security
Settings
,
Baud Rate
.
FUNCTION
DESCRIPTION
