Introduction
11
Controls and functions
Projector
7.
POWER indicator light
Lights up or flashes when the projector is
under operation. See
"Indicators" on
page 60
for details.
8.
AUTO
Automatically determines the best
picture timings for the displayed image.
See
"Auto-adjusting the image" on page
24
for details.
9.
►
Right/
Increase volume level
Increases volume. See
"Adjusting the
sound level" on page 40
for details.
When the On-Screen Display (OSD)
menu is activated, the #3,
#4, #6, and #9
keys are used as directional arrows to
select the desired menu items and to
make adjustments. See
"Using the menus"
on page 26
for details.
10. MODE/ENTER
Selects an available picture setup mode.
See
"Selecting a picture mode" on page
33
for details.
Enacts the selected On-Screen Display
(OSD) menu item.
See
"Using the menus"
on page 26
for details.
11.
POWER
Toggles the projector between standby
mode and on.
See
"Starting up the projector" on page
23
and
"Shutting down the projector" on
page 42
for details.
12. LAMP indicator light
Indicates the status of the lamp. Lights up
or flashes when the lamp has developed a
problem. See
"Indicators" on page 60
for
details.
13. TEMPerature indicator light
Lights up red if the projector's
temperature becomes too high. See
"Indicators" on page 60
for details.
1.
FOCUS
Ring
Used to adjust the projected image
appearance. See
"Fine-tuning the image
size and clarity" on page 25
for details.
2.
MENU/EXIT
Turns on the On-Screen Display (OSD)
menu. Goes back to previous OSD menu,
exits and saves menu settings. See
"Using
the menus" on page 26
for details.
3.
Keystone/Arrow keys (
/
▲
Up)
Manually corrects distorted images
resulting from an angled projection.
See
"Correcting keystone" on page 25
for
details.
4.
◄
Left/
Decrease volume level
Decreases volume. See
"Adjusting the
sound level" on page 40
for details.
5.
SOURCE
Displays the source selection bar. See
"Switching input signal" on page 30
for
details.
6.
Keystone/Arrow keys (
/
▼
Down)
Manually corrects distorted images
resulting from an angled projection. See
"Correcting keystone" on page 25
for
details.
1
3
8
4
5
6
12
13
2
7
9
10
11
