Operation
50
4. System Setup: Basic men
u
Presentation
Timer
Reminds the presenter to finish the presentation within a certain
time frame. See
"Setting the presentation timer" on page 36
for details.
Language
Sets the language for the On-Screen Display (OSD) menus.
See
"Using the menus" on page 26
for details.
Projector
Installation
The projector can be installed on a ceiling or behind a screen, or with
one or more mirrors.
See
"Choosing a location" on page 16
for details.
Menu Setting
Menu display time
Sets the length of time the OSD will remain active after your last key
press. The range is from 5 to 30 seconds in 5-second increments.
Menu Position
Sets the On-Screen Display (OSD) menu position.
Reminder Message
Selecting
On
allows the projector to remind you to clean the filter.
Operation
Setting
Direct Power On
Powers projector on automatically when the power cable is
connected.
Auto Power Off
Allows the projector to turn off automatically if no input signal is
detected after a set period of time.
See
"Setting Auto Power Off" on page 55
for details.
Quick Cooling
Enables or disables the
Quick Cooling
function.
Selecting
On
enables the function and the projector cooling time will
be shortened from a normal 90 second duration to approximately 2
seconds.
If you attempt to restart the projector right after the quick cooling
process, it may not be turned on successfully and will rerun its cooling fans.
Instant Restart
Selecting
On
enables you to restart the projector immediately within
90 seconds after turning it off.
Blank Timer
Sets the image blank time when the Blank feature is activated, once
elapsed the image will return to the screen.
See
"Hiding the image" on page 38
for details.
Sleep Timer
Sets the auto-shutdown timer. The timer can be set to a value
between 30 minutes and 12 hours.
FUNCTION
DESCRIPTION
