background image

Operation

28

6.

Press 

 

to select a menu item to be changed and adjust the value with 

/

. See 

"Fine-tuning the image quality in user modes"

 below for details.

Fine-tuning the image quality in user modes

According to the detected signal type and selected picture mode, some of the below 

functions may not be available. Based on your needs, you can make adjustments to these 
functions by highlighting them and pressing 

/

 on the projector or remote control.

Adjusting 

Brightness

The higher the value, the brighter the image. And the 

lower the setting, the darker the image. Adjust this 

control so the black areas of the image appear just as 

black and that detail in the dark areas is visible.

Adjusting 

Contrast

The higher the value, the greater the contrast. Use this 

to set the peak white level after you have previously 

adjusted the Brightness setting to suit your selected 

input and viewing environment.

Adjusting 

Color

Lower setting produces less saturated colors. If the setting is too high, colors on the image 

will be overpowering, which makes the image unrealistic.

Adjusting 

Tint

The higher the value, the more reddish the picture becomes. The lower the value, the 

more greenish the picture becomes.

Adjusting 

Sharpness

The higher the value, the sharper the picture becomes. The lower the value, the softer the 

picture becomes.

Adjusting 

Brilliant Color

This feature utilizes a new color-processing algorithm and system level enhancements to 

enable higher brightness while providing truer, more vibrant colors in picture. It enables a 

greater than 50% brightness increase in mid-tone images, which are common in video and 

natural scenes, so the projector reproduces images in realistic and true colors. If you 

prefer images with that quality, select 

On

. If you don’t need it, select 

Off

.

When 

Off

 is selected, the 

Color Temperature

 function is not available.

Selecting a 

Color Temperature

The options available for color temperature* settings vary according to the signal type 

selected.

1.

Cool:

 Makes images appear bluish white.

2.

Normal:

 Maintains normal colorings for white.

3.

Warm:

 Makes images appear reddish white.

*About color temperatures:

There are many different shades that are considered to be "white" for various purposes. 

One of the common methods of representing white color is known as the “color 

temperature”. A white color with a low color temperature appears to be reddish white. A 

white color with a high color temperature appears to have more blue in it.

+50

+30

+70

0

-30

+30

Summary of Contents for MS517H





























































Reviews: