![background image](http://html.mh-extra.com/html/benq/ms517h/ms517h_user-manual_2734728041.webp)
Operation
41
Function
Description
Picture Mode
Pre-defined picture modes are provided so you can optimize your
projector image set-up to suit your program type. See
for details.
Reference
Mode
Selects a picture mode that best suits your need for the image quality
and further fine-tune the image based on the selections listed on the
same page below. See
"Setting the User 1/User 2 mode" on page 27
for details.
Brightness
Adjusts the brightness of the image. See
for details.
Contrast
Adjusts the degree of difference between dark and light in the image.
"Adjusting Contrast" on page 28
for details.
Color
Adjusts the color saturation level -- the amount of each color in a
video image. See
for details.
This function is only available when a Video, S-Video or Component Video
signal is selected.
Tint
Adjusts the red and green color tones of the image. See
for details.
This function is only available when a Video or S-Video signal is selected and
the system format is NTSC.
Sharpness
Adjusts the image to make it look sharper or softer. See
for details.
This function is only available when a Video, S-Video or Component Video
signal is selected.
Brilliant Color
"Adjusting Brilliant Color" on page 28
for details.
Color
Temperature
"Selecting a Color Temperature" on page 28
for details.
Color
Temperature
Fine Tuning
"Setting a preferred color temperature" on page 29
for details.
3D Color
Management
"3D Color Management" on page 29
for details.
Reset Picture
Settings
"Resetting current or all picture modes" on page 30
for details.
Quick Auto
Search
"Switching input signal" on page 24
for details.
Color Space
Conversion
"Switching input signal" on page 24
for details.
2. PICTURE
men
u
3. SOURCE men
u