background image

Introduction

10

Controls and functions

Projector

1.

Focus ring

Adjusts the focus of the projected image.

2.

Zoom ring

Adjusts the size of the image.

3.

TEMPerature warning light

Lights up red if the projector's 
temperature becomes too high.

4.

MENU/EXIT

Turns on the On-Screen Display (OSD) 
menu. Goes back to previous OSD menu, 
exits and saves menu settings.

5.

 Left/

Decreases the projector volume.

6.

ECO BLANK

Used to hide the screen picture.

7.

Keystone/Arrow keys 
(

/ Up, 

/

Down)

Manually corrects distorted images 
resulting from an angled projection.

8.

LAMP indicator light

Indicates the status of the lamp. Lights up 
or flashes when the lamp has developed a 
problem.

9.

AUTO

Automatically determines the best picture 
timings for the displayed image.

10. POWER indicator light

Lights up or flashes when the projector is 
under operation.

11.

 

POWER

Toggles the projector between standby 
mode and on.

12.

Right/

Increases the projector volume.
When the On-Screen Display (OSD) 
menu is activated, the #5, #7, and #12 
keys are used as directional arrows to 
select the desired menu items and to 
make adjustments.

13. SOURCE

Displays the source selection bar.

14. MODE/ENTER

Selects an available picture setup mode.
Activates the selected On-Screen Display 
(OSD) menu item.

1

2

3
4
5

7

8
9

7

6

11

12
13
14

10

Summary of Contents for MS517H





























































Reviews: