You will find two rechargeable batteries for the mouse included in this package. If you
need to replace the batteries in the future, make sure that you use new batteries and that you
change all of the batteries at the same time.
Please follow the diagram for battery installation direction. It is recommended to use two
1300mAh to 1600mAh AA-size NiMH rechargeable batteries.
DO NOT Load
‘Non-Rechargeable Batteries’ into the Charging Station.
2. Hardware Installation
The wireless receiver allows the mouse to communicate with your computer.
Depending upon your computer hardware and operating system, the wireless
receiver can be connected through either a USB or PS/2 port on your computer.
PS/2 CONNECTION
(1) Windows 98 SE/2000/Me/XP
Step 1: Shut down Windows and turn off the computer.
Step 2: Attach the USB-to-PS/2 adapter to the USB connector on the end of the
cable connected to the wireless receiver, and then plug this into the round
PS/2 mouse port on your computer. On most computers, this port is Green
and labeled with a mouse icon.
Step 3: Turn on the computer.
8
Step 4: Proceed to
Section 3 – Establishing a Wireless Connection
and
Section
5 – Software Installation
to complete the installation.
USB CONNECTION
(2) Windows 98 SE/2000/ME/XP
Step 1: With your computer turned on, plug the USB connector (on the cable
attached to the wireless receiver) into an available USB port on your
computer.
Note: The USB-to-PS/2 adapter is NOT required for USB connection.
Step 2: The system will automatically detect the new hardware and install the
device ready to use.
3
