![background image](http://html.mh-extra.com/html/benq/lh500-series/lh500-series_user-manual_2733729029.webp)
29
1.
In the REC mode, press [ ] ( ) once.
2.
Use [ ] and [ ] to select the flash setting
you want and then press [SET].
•
If there are no indicators on the monitor
screen, you can cycle through the flash modes
by pressing [ ] ( ). You can turn display
information on or off by pressing [ ] (DISP).
3.
Slide the flash button to raise the
flash manually.
4.
Press the shutter button to shoot.
5.
Push the flash back down.
Using Flash (Flash)
Auto Flash
Flash fires automatically in accordance with exposure (amount
of light and brightness) conditions.
Forced Off
Flash does not fire.
Forced On
Flash always fires. This setting can be used to brighten a subject
that normally comes out dark due to daylight or backlight
(daylight synchro flash).
Red Eye
Reduction
Flash fires automatically. This type of flash can be used to
reduce the chance of redness in the subject’s eyes.
Flash
[ ] ( )
2
1
Back lamp
Flashes red while the flash is charging to
indicate that image recording is disabled.
• You will not be able to take another flash
snapshot until the lamp stops flashing red,
which indicates that charging is complete.
indicates the flash will fire.