![background image](http://html.mh-extra.com/html/benq/lh500-series/lh500-series_user-manual_2733729061.webp)
61
Other Settings (Setup)
This section explains menu items that you can use to configure settings and perform other
operations in both the REC mode and PLAY mode.
Procedure
[SET]
MENU
Setup Tab
Sounds
•
Setting a volume level of 0 mutes output.
Procedure
[SET]
MENU
Setup Tab
Startup Image
Display the image you want to use as your startup image and then select “On”.
•
The startup image does not appear when you turn on the camera by pressing [
]
(PLAY).
•
You can specify a snapshot you recorded as the startup image, or you can use the special
startup image provided in the camera’s built-in memory.
•
If you select an audio snapshot as the startup image, the audio will not play at startup.
•
Formatting built-in memory will delete the current startup image setting.
Configuring Camera Sound Settings (Sounds)
Startup
Sound 1 / Sound 2 / Sound 3 / Sound 4 / Sound 5 / Off
Half Shutter
Shutter
Beep
Beep
Specifies the sound volume. This setting is also used as the audio
level during video output.
Playback
Specifies the volume of movie and Audio Snapshot audio output.
This volume setting is not used during video output (from the
USB/AV port).
Configuring a Startup Image