background image

  49

  Maintenance

Maintenance

Care of the projector

Your projector needs little maintenance. The only thing you have to do on a regular basis is keep the lens 
clean. 

Never remove any parts of the projector except the lamp. Contact your dealer or local customer service 
center if the projector fails to operate as expected.

Cleaning the lens

Clean the lens whenever you notice dirt or dust on the surface. 

Before cleaning any part of the projector, turn it off using the proper shutdown procedure (see 

Shutting 

down the projector

), unplug the power cable, and let it cool down completely. 

•  Use a canister of compressed air to remove dust. 
•  If there is dirt or smears, use lens-cleaning paper or moisten a soft cloth with lens cleaner and gently 

wipe the lens surface.

•  Never use any type of abrasive pad, alkaline/acid cleaner, scouring powder, or volatile solvent, such as 

alcohol, benzene, thinner or insecticide. Using such materials or maintaining prolonged contact with 
rubber or vinyl materials may result in damage to the projector surface and cabinet material.

Never touch the lens with your finger or rub the lens with abrasive materials. Even paper towels can damage 
the lens coating. Only ever use a proper photographic lens brush, cloth, and cleaning solution. Do not 
attempt to clean the lens while the projector is switched on or is still hot from previous use.

Cleaning the projector case

Before cleaning any part of the projector, turn it off using the proper shutdown procedure (see 

Shutting 

down the projector

), unplug the power cable, and let it cool down completely. 

•  To remove dirt or dust, wipe the case with a soft, dry, lint-free cloth.
•  To remove stubborn dirt or stains, moisten a soft cloth with water and a neutral detergent. Then 

wipe the case.

Never use wax, alcohol, benzene, thinner or other chemical detergents. These can damage the case.

Storing the projector

To store the projector for an extended time:

•  Make sure the temperature and humidity of the storage area are within the recommended range for 

the projector. Refer to 

Specifications

 or consult your dealer about the range.

•  Retract the adjuster feet.
•  Remove the batteries from the remote control.
•  Pack the projector in its original packing or equivalent.

Transporting the projector

It is recommended that you ship the projector with its original packing or equivalent.

Summary of Contents for HT1075
































































Reviews: