32
Menu Functions
Volume
Adjusts the volume level of the projector's internal speaker or the volume being
output from the audio output jack.
If the Mute function is activated, adjusting Volume will turn off the Mute
function.
The function is accessible through the remote control.
Mute
Selects
On
to temporarily turn off the projector's internal speaker or the volume
being output from the audio output jack.
To restore the audio, select
Off
.
The function is accessible through the remote control.
3D Mode
This projector supports playing three-dimensional (3D) content transferred through
your 3D-compatible video devices and contents, such as PlayStation consoles (with
3D game discs), 3D Blu-ray 3D players (with 3D Blu-ray discs), 3D TV (with 3D
channel), and so on. After you have connected the 3D video devices to the projector,
wear the BenQ 3D glasses and make sure the power is on to view 3D contents.
When watching 3D contents,
• the image may seem misplaced, however, this is not a product malfunction.
• take appropriate breaks when watching 3D content.
• stop watching 3D content if you feel fatigue or discomfort.
• keep a distance from the screen of about three times the effective height of
the screen when watching 3D content.
• children and people with a history of oversensitivity to light, heart problems,
or have any other existing medical condition should be refrained from
watching 3D content.
The default setting is
Auto
and the projector automatically chooses an appropriate
3D format when detecting 3D contents. If the projector cannot recognize the 3D
format, manually choose a 3D mode according to your preference.
When this function is enabled:
• The brightness level of the projected image decreases.
• The Picture Mode cannot be adjusted.
• The 2D Keystone can only be adjusted within limited degrees.
The function is accessible through the remote control.
3D Sync Invert
When your 3D image is distorted, enable this function to switch between the image
for the left eye and the right eye for the more comfortable 3D viewing experience.
The function is accessible through the remote control
.
Settings
Press
OK
to enter its submenu. See below for more details.
•
Language
Sets the language for the On-Screen Display (OSD) menus.
•
Projector
Position
The projector can be installed on a ceiling or behind a screen, or with one or more
mirrors. See
Choosing a location
for details.
•
Test Pattern
Enables this function to display the grid test pattern, which helps you adjust the image
size and focus so as to check if the projected image is free of distortion.
•
Auto Source
Sets whether the projector searches automatically for input sources. Select
On
to
enable the projector to scan for input sources until it acquires a signal. If the function
is set to
Off
, the projector selects the last used input source.
•
Menu Type
Switches to the
Advanced
OSD menu.
