![background image](http://html1.mh-extra.com/html/benq/gsi-outdoor-leisure-series/gsi-outdoor-leisure-series_user-manual_2734511047.webp)
47
6. Select the speaker or headphones from the list of Bluetooth devices in the Bluetooth setting menu.
7. When the projector and speaker or headphones have successfully connected the device listing in the Bluetooth setting menu will be labeled
Connected
, you can now output the audio from the projector to the speaker or headphone.
Once you have successfully paired your mobile device with the Bluetooth speaker, pairing information will be stored on both devices and a connection
will automatically be made when Bluetooth is enabled on both devices and both devices are within range of each other.
Ending a Bluetooth connection
In cases where you want to disconnect a speaker or headphones from the projector and connect to another speaker or headphones follow the steps
below:
1. Press
on the projector or your remote control to display the source selection bar.
2. Select
Bluetooth
in the source list, the Bluetooth setting menu will launch.
3. Select the already connected speaker or headphones from the list of Bluetooth devices in the Bluetooth setting menu and press
OK
.
4. Confirm that you want to disconnect the speaker or headphones from the projector.
5. Activate Bluetooth-pairing mode on the new speaker or headphones.
6. Select the new speaker or headphones from the list of Bluetooth devices in the Bluetooth setting menu.
Deactivating the Bluetooth speaker or headphones
To deactivate Bluetooth on the projector so that it no longer outputs its audio to a separate speaker or headphones:
1. Press
on the projector or your remote control to display the source selection bar.
2. Select
Bluetooth
in the source list, the Bluetooth setting menu will launch.
3. Select the Bluetooth switch in the Bluetooth setting menu and press
OK
on the projector or your remote control so that the Bluetooth switch
is in the disabled position.
If you are unable to find the speaker or headphones from the list of Bluetooth devices on the first try, ensure that pairing mode is activated on the device, then select
Scan
for devices
in the Bluetooth setting menu to restart the scanning process.
If you are unable to find the speaker or headphones from the list of Bluetooth devices on the first try, ensure that pairing mode is activated on the device, then select
Scan
for devices
in the Bluetooth setting menu to restart the scanning process.
Summary of Contents for GSI Outdoor Leisure Series
