![background image](http://html1.mh-extra.com/html/benq/gsi-outdoor-leisure-series/gsi-outdoor-leisure-series_user-manual_2734511023.webp)
23
Replacing the remote control battery
1. Push and hold the arrow on battery cover while pushing out the battery cover.
2. Insert the two new batteries in the battery slots. Note that the battery contacts should be orientated to match the orientation etched on the
battery slots.
3. Push the battery cover back onto the remote control.
Remote control effective range
The remote control must be held at an angle within 15 degrees perpendicular to the projector's IR remote control sensor(s) to function correctly. The
distance between the remote control and the sensor(s) should not exceed 8 meters (~ 26 feet).
Make sure that there are no obstacles between the remote control and the IR sensor(s) on the projector.
• Avoid leaving the remote control and battery in an excessive heat or humid environment like the kitchen, bathroom, sauna, sunroom or in a closed car.
• Replace only with the same or equivalent type recommended by the battery manufacturer.
• Dispose of the used batteries according to the manufacturer's instructions and local environment regulations for your region.
• Never throw the battery into a fire. There may be danger of an explosion.
• If the battery is drained or if you will not be using the remote control for an extended period of time, remove the battery to avoid damage to the remote control from
possible battery leakage.
Summary of Contents for GSI Outdoor Leisure Series
