BenQ G2320HDB Service Manual Download Page 12

Page: 12 / 62

23” LCD Color Monitor BenQ G2320HDB

Level 1 Cosmetic / Appearance / Alignment Service

Visual Inspection & Cleaning

•

Cleaning. Always unplug your monitor from the wall outlet before cleaning. Clean the LCD monitor surface with a

lint-free, non-abrasive cloth. Avoid using any liquid, aerosol or glass cleaners.

•

Slots and openings on the back or top of the cabinet are for ventilation. They must not be blocked or covered.

Your monitor should never be placed near or over a radiator or heat source, or in a built-in installation unless

proper ventilation is provided.

•

Never push objects or spill liquid of any kind into this product.

Software/Firmware Upgrade Process

1. When do the part, need the tools as follow:

a. An i486 (or above) personal computer or compatible

b. Microsoft operation system Windows 95/98/2000/XP

c. “PORT95NT.exe” program

d. ISP BOARD (x1), Printer cable (x1), VGA cable (x1)

2. Install the “PORT95NT.exe”, and restart the computer.

Note:

After installation, you must restart the PC to take the setup to effect.

3. Connect the ISP board as follow:

Connect to

the PC LPT

Connect to the

BenQ model

Summary of Contents for G2320HDB































































Search results

Summary of Contents for G2320HDB

Reviews:

Related manuals for G2320HDB

Brands by name

Popular brands

BenQ G2320HDB, Service Manual

Search results

Summary of Contents for G2320HDB

Reviews:

Related manuals for G2320HDB

Brands by name

Popular brands