On-Screen Display (OSD) menu
33
Eng
lish
Performing manual installation
The Manual Installation feature allows you to change the program locations that are stored in
the TV Program memory of the display.
This option is not possible when the Child lock is activated. See
"Child lock" on page 35
.
1. From the TV Menu, press the or buttons to select Manual Installation and then press
the OK button. The Manual Installation menu will display:
2. If the Country menu item is set to "Other", you should press the or buttons to select a
TV standard according to your region. See
"TV menu" on page 32
.
3. Press the button to highlight Selected PR and then press the program selection buttons to
input the TV program you want to set up.
4. Press the button to highlight Frequency and then press the or buttons to start the
tuning system. If the tuned program is incorrect, press the or button again until your
desired program is located. You can directly input the frequency using the program selection
buttons if you wish.
5. Press the button to highlight Fine Tune and then press the or buttons to adjust the
reception of TV signal (only necessary where the image or sound reception is poor).
6. If the SCART signal input is connected, press the button to highlight Decode and then
press the or buttons to select from the following options:
• On: Select this option if an external decoder Set-Top-Box (STB) is being used.
• Off: Select this option if no external decoder STB is being used.
7. Press the button to highlight Text Code and then press the or buttons to select a code
format for the Teletext function.
8. Press the button to highlight Store on Prog. and then press the OK button to save this
program to the TV Program memory.
9. Press the MENU button again to close the menus.
DV3251-En.book Page 33 Monday, December 12, 2005 4:07 PM
