Getting to know your display
14
En
gli
sh
Display (rear view)
No.
Name
Description
1
AC INLET
Connect to the AC power cable
2
HDMI
Connect to a DVI digital video or HDMI digital audio/video output of
your digital source device
3
PC AUDIO
Connect to the audio output of either the PC or DVI digital video
output as appropriate for your source device.
4
PC D-SUB
Connect to a PC's RGB video (D-Sub) output. See
"Supported PC
(D-Sub/DVI) Input Signal Timing" on page 40
for compatible
timing modes.
5
COMPONENT 2
Y Cr/Pr Cb/Pb
Connect each to the component video (Y Cb/Pb Cr/Pr) outputs of
appropriate video source devices
6
COMPONENT 1
Y Cr/Pr Cb/Pb
Connect each to the component video (Y Cb/Pb Cr/Pr) outputs of
appropriate video source devices
7
COMPONENT 1
AUDIO
Connect each to the component audio outputs of appropriate video
source devices to match that of each component video input
8
COMPONENT 2
AUDIO
Connect each to the component audio outputs of appropriate video
source devices to match that of each component video input
9
AV3 VIDEO
AV3 S-VIDEO
Connect to either the Composite Video or S-Video output as
appropriate for your AV source device
Connect your external AV device using either the Video or S-Video
inputs. If both are connected to an AV source at the same time, S-
Video input takes preference over Video input. S-Video will provide a
better quality image.
1
2
4
6
9 11
8
12
13
3
5
7
10
DV3251-En.book Page 14 Monday, December 12, 2005 4:07 PM
