![background image](http://html.mh-extra.com/html/benq/de325/de325_user-manual_2733818058.webp)
52
Schedule recording
Eng
lish
12. Press the
Right
button to highlight ’
Save
’, and then press the
OK
button to store
the schedule setting.
13. Press the
Left
button to close the schedule list.
14. Press the
Setup
button to close the ’Setup’ menu.
15. Load an appropriate recordable (non write-protected) DVD into the DVD Recorder.
Note:
The schedule function will only become active while the DVD Recorder is in standby mode.
16. Press the
Power/standby
button to turn off the DVD Recorder (so that the timer
programming can take effect).
17. When the schedule recording function is triggered, the message ’
TIMER
’ will show on the
front display panel.
Changing or erasing schedule setting
How to change a schedule setting:
1. Press the
Setup
button on the remote control. The ’Setup’ menu will display on-screen.
2. Press the
Up
or
Down
button to select the
Record Setup
icon, and
then press the
Right
button.
3. Press the
Up
or
Down
button to select ’
Schedule
Rec.
’, and then press the
Right
button. The schedule list will appear on-screen.
4. If more than one schedule setting is displayed in the list, press the
Up
or
Down
button to select the schedule setting you wish to alter.
5. Press the
Right
button to edit the setting.
6. Press the
Left
or
Right
button to select a column. Press the
Up
or
Down
or the numbered buttons to change the column value appropriately if required,
7. Press the
Right
button to highlight ’
Save
’, and then press the
OK
button to store
the schedule setting.
8. Press the
Left
button to close the schedule list.
9. Press the
Setup
button to close the ’Setup’ menu.
10. Press the
Power/standby
button to turn off the DVD Recorder (so that the timer
programming can take effect).
DE325.book Page 52 Thursday, September 29, 2005 10:50 AM