![background image](http://html.mh-extra.com/html/benq/de325/de325_user-manual_2733818014.webp)
8 Introduction
Eng
lish
On-screen display (OSD) menus
’Setup’ menu
You can define the initial setup of the DVD Recorder from the ’Setup’ menu or change the
settings of other items to suit your preferences.
4
Lit when playback/record paused.
5
Displays status messages:
TV ON?:
The DVD Recorder is currently in the initial setup mode. Refer to "Initializing
the DVD Recorder" on page 24 for initial setup details.
TRAY OPEN: Disc tray open.
CLOSING:
Disc tray closing.
READING:
Disc being read.
NO DISC:
No disc has been inserted for recording. If a disc has been inserted, perhaps
it cannot be read.
INFO:
Information on the inserted DVD is displayed on-screen.
ERASING:
The entire disc is being erased.
BLANK DISC: The disc inserted is either new or has been completely erased (no
recordings).
PROTECTED: The disc is protected against recording.
CHxx:
Current TV channel where xx represents the channel number.
DISC FULL:
The disc is full. There is no space for new recordings.
DISC ERR:
An error occurred when the title was being written.
BLOCKED:
It is not possible to close/open the disc tray.
6
Lit when recording is in progress.
7
Various segments lit to indicate the type of inserted DVD disc: DVD, DVD+R, DVD+RW.
(disc types DVD-R and DVD-RW are shown as DVD.)
8
Various segments lit to indicate the type of CD inserted: SAVCD, VCD, CD.
9
Lit when the number displaying above it is the selected title number of the DVD.
10
Lit when a recording timer has been programmed (and other functions are disabled).
11
Lit when the number displaying above it is the selected track number of the CD.
12
Lit when receiving a Nicam audio signal (in regions using PAL systems only).
13
Lit when the number displaying above it is the currently selected/playing chapter.
14
Lit when a remote control signal is being received.
15
Lit when a Dolby digital audio signal is available on the digital audio output.
16
Lit when an alternate camera angle is available/selected.
17
Lit when an MPEG audio signal is available on the digital audio output.
18
Lit when the number displaying above it is the remaining playback time of the disc being
played.
19
Lit when a PCM audio signal is available on the digital audio output.
20
Lit when a DTS audio signal is available on the digital audio output.
21
Lit when 2 channel (stereo) audio is available on the analog audio outputs.
DE325.book Page 8 Thursday, September 29, 2005 10:50 AM