![background image](http://html.mh-extra.com/html/benq/de325/de325_user-manual_2733818054.webp)
48 Recording
Eng
lish
Should any other messages display on-screen, the disc is unreadable, unrecognized,
unwritable, or is full. Refer to "Troubleshooting" on page 72 for a possible solution.
2. Press the
Input
button several times to select the video input source you wish to
record.
TUNER:
Selects the TV/CATV signal source connected to ANTENNA terminal on the rear panel.
If ’
TUNER
’ is selected as the input source, you can press the
Channel
button to select the
channel you wish to record. You can also select a channel directly by using the numeric keys (two digits:
01–99) on the remote control.
EXT1:
Selects the signal source from the device connected to the Composite input terminals on the rear panel.
EXT2:
Selects the signal source from the device connected to the S-Video input terminal on the rear panel.
Tips
Should you have multiple input devices connected using separate video inputs (Composite Video or S-
Video) you should switch on and use only the video input source device you wish to have the DVD
Recorder record onto DVD, and turn off all other video input source devices not in use.
When both S-Video and Composite Video inputs are present, the DVD Recorder will automatically
select the S-Video input.
CAM1:
Selects the signal source from the device connected to the Composite Video input terminals on the front
panel.
DV (CAM2):
Selects the signal source from the device connected to the DV input port on the front panel.
3. When you're ready to start recording, press either:
- the
Record
button on the remote control; or
- the
button on the DVD Recorder.
The
’Record
’ icon will display on-screen.
4. To stop recording, press the
Record stop
button on the remote control.
When you stop recording, the title is closed, and the file details are written to the medium.
The DVD Recorder creates the table of contents of the recording.
Sleep mode recording
While recording to DVD after a manual recording start (not schedule recording start), the
DVD Recorder allows you to set the remaining recording time, which will make the DVD
Recorder automatically stop recording and turn itself off (go to standby mode) at the end of
that time. This is known as Sleep mode recording.
You manually start recording (as explained in "Manual recording" on page 47) and then press
the
Record
button again to activate Sleep mode recording.
How to activate the Sleep mode timer:
1. Place an unfinalized suitable DVD in the disc tray.
2. Press the
Input
button several times to select the video input source you wish to
record.
3. When you're ready to start recording, press either:
- the
Record
button on the remote control; or
- the
button on the DVD Recorder.
The
’Record
’ icon will display on-screen.
DE325.book Page 48 Thursday, September 29, 2005 10:50 AM