BenQ DC 4500 User’s Manual
60
6. N
I
MH
BATTERY
CHARGER
USAGE
Preparations
The DC 4500 package provides a NiMH battery charger for charging your DC 4500
NiMH batteries.
Use Charger To Charge NiMH Battery
• Put the NiMH battery in the battery socket on the charger. Please note the polarity
of the batteries when you install.
• Make sure the NiMH battery is fixed on the socket, then plug the power plug into
the power outlet and you will see the “Charge” indicator on the charger turn from
green to red. When the “Charge” indicator turns to red, it means the charger is
charging the NiMH battery.
Note: You can also use an AC power adapter to supply electric
power to your DC 4500. Please contact your local dealer to
buy an AC power adapter for your DC 4500. The specification
of the suitable power adapter is 3.3V/2.5A, other power
adapter beyond this specification may cause damage to your
camera.
“+” “-” contact parts
Charge indicator
Note: Please note that the power plug is on the rear side of the NiMH
battery chager.
Power plug