BenQ DC 4500 User’s Manual
7
2.4. Turning off the power
2.4.1. Power Save Mode
The DC 4500 supports power save function. If the DC 4500 doesn’t receive any
operation from the user for 3 minutes (This is the default value, you can set the
time limit from 1~ 10 minutes), it will enter power save mode automatically. In
addition, you can press any key to wake up the DC 4500 from power save mode.
2.4.2. Auto Shut Down Mode
The DC 4500 supports auto shut down function. If the DC 4500 doesn’t receive
any operation from the user for 3 minutes, it will enter auto shut down mode and
automatically shut down instantly. To wake up the DC 4500 from auto shut down
mode, you have to press the power button to turn on the power again.
To turn off the power, you have to press the
power button again. After pressing the power
button, the camera beep twice. The first beep
indicates that the camera starts to shut down
and the second beep means the end of shut
down. Then, you will see the status display and
LCD monitor both turn blank. Then the power
is turned off.
Press the Power button.
