17
Getting started
right page (17)
of ONYX SL91 FCC am (11.09.2006, 12:00)
Ben
Q
2006, Z:\SL
91_ONYX\ou
tput
\FUG\ON
YX_FCC_am_060911_t
e\FM\
ONYX_Start
up.fm
Te
m
p
lat
e: Minion
, 140x105 mm, Ve
rsi
o
n 2.0;
VAR Language: am;
VAR issue
date: 060711
Getting started
Your phone's display is covered with a
protective film. Remove this film slowly
before using the phone.
In rare cases, static discharge may
cause discolouration at the edges of the
display. However, this will disappear
within approx. 10 minutes.
Inserting the SIM card
The service provider supplies you with
a SIM card on which all the important
data for your line is stored. If the SIM
card has been delivered in credit-card
size, snap the smaller segment out and
remove any rough edges.
• Place the SIM card in front of the
slot with the contact surface facing
down
. Then press the SIM card down
slightly to push it in
1
(ensure that
the chamfered corner is in the correct
position).
Inserting/removing the
Micro SD card
The Micro SD card gives your phone a
very large memory capacity. This allows
you to save picture/video files and
sound recordings, for example. Howev-
er, you can also use this Micro SD card
like a floppy disk to save any other files.
You can access the list of folders and
files in the My stuff menu (page 101).
The number of files stored on your
Micro SD card influences the access
times. If more than 300 files are saved on
your card, the performance of the phone
is decreased.
To assign a file from the Micro SD card
to a function in the phone such as a
ringtone, you should copy the file to
the phone. Otherwise the setting is
reset to default whenremoving the
Micro SD card.
Please observe the manufacturer's
operating instructions that come with the
Micro SD card.