11/ 2008
BENNING CM 9
59
5.1.12 Współczynnik temperaturowy wartości mierzonej: 0,2 x (wyspecyfiko
-
wana precyzja pomiaru)/ °C < 18 °C lub > 28 °C, związany z wartością
dla temperatury odniesienia 23 °C.
5.1.13 Miernik BENNING CM 9 zasilany jest z dwóch baterii 1,5 V typu micro
(IEC LR 03/ AAA).
5.1.14 Jeżeli napięcie baterii spadnie poniżej ustalonego napięcia roboczego,
wówczas na wyświetlaczu miernika BENNING CM 9 pojawi się symbol
baterii
5
. Aby uniknąć błędnych wartości pomiarów należy bezzwłocz
-
nie wymienić baterie.
5.1.15 Okres życia baterii wynosi około 60 godzin (bateria alkaliczna).
5.1.16 Wymiary przyrządu: (L x W x H) = 205 x 75 x 40 mm
Masa przyrządu: 270 g
5.1.17 Największe rozwarcie cęgów: 43 mm
5.1.18 Największa średnica kabla: 40 mm
6. Warunkiśrodowiskowe:
- Przyrząd BENNING CM 9 przeznaczony jest do wykonywania pomiarów w
środowisku suchym.
- Maksymalna wysokość nad poziomem morza dla wykonywanych pomia
-
rów: 2000 m,
- Kategoria przepięciowa/ Kategoria lokalizacji: IEC 60664-1/ IEC 61010-1
(2001) → 300 V kategoria III
- EMC: EN 61326-1
- Klasa zanieczyszczenia: 2,
- Stopień ochrony obudowy: IP 40.
Stopień ochrony IP 40: Ochrona przed dostępem do niebezpiecznych czę
-
ści oraz ochrona przed zanieczyszczeniem ciałami stałymi o wymiarach >
1 mm (4 - pierwsza cyfra). Brak ochrony przed wodą (0 - druga cyfra)
- Temperatura pracy i wilgotność względna:
Dla temperatury pracy od 0 °C do 30 °C: wilgotność względna poniżej 80 %
Dla temperatury pracy od 31 °C do 40 °C: wilgotność względna poniżej 75 %
Dla temperatury pracy od 41 °C do 50 °C: wilgotność względna poniżej 45 %
- Temperatura przechowywania: Miernik BENNING CM 9 może być przecho
-
wywany w dowolnej temperaturze w zakresie od - 20 °C do + 60 °C (wilgot-
ność względna od 0 do 80 %). Bateria powinna być wyjęta z miernika na
czas przechowywania.
7. Specyfikacje elektryczne
Uwaga: Precyzję pomiaru określa się jako sumę
- ułamka względnego wartości mierzonej i
- liczby cyfr (kroków zliczania cyfry najmniej znaczącej).
Określona w ten sposób precyzja jest ważna dla temperatur w zakresie od 18 °C
do 28 °C i wilgotności względnej poniżej 80 %.
7.1 Zakresy pomiarowe prądu przemiennego, filtr dolnoprzepustowy
nieaktywny
Zakres
pomiar.
Rozdzielczość
Precyzja pomiar.
*1
w zakresie
częstotliwości 50 Hz - 60 Hz
Zabezpieczenie
przeciążeniowe
6 mA
0,001 mA
0…50 A
± (1 % wartości p 3 cyfr)
50…60 A
± (5 % wartości p 6 cyfr)
60…100 A
± (8 % wartości p 6 cyfr)
w zakresie częstotliwości 61 Hz - 400 Hz
0...30 A
dodatkowy (2 % wartości p 6 cyfr)
30...100 A
dodatkowy (30 % wartości p 6 cyfr)
300 V
eff
60 mA
0,01 mA
600 mA
0,1 mA
6 A
0,001 A
60 A
0,01 A
100 A
0,1 A
AutoRange
różny
*1
Wartość pomiarowa uzyskiwana jest poprzez wyprostowanie wartości śred
-
niej i wskazywana jako wartość skuteczna. W przypadku przebiegów niesi
-
nusoidalnych, wskazywana wartość staje się niedokładna.
Wskazana precyzja jest wyspecyfikowana dla przewodów uchwyconych central
-
nie przez cęgi prądowe
1
(patrz Rys. 2 - 7). Jeżeli przewód nie jest uchwycony
centralnie, należy uwzględnić dodatkowy błąd 1 % wartości wskazanej. Wpływ
pola magnetycznego przewodów równoległych: 0,002 % wartości typowej.