11/ 2008
BENNING CM 9
13
F
Notice d’emploi
BENNING CM 9
Pince numérique de courant de fuite pour
- mesure de courants de fuite (courant différentiel et courant du conduc-
teur de protection) dans les installations et appareils électriques
Sommaire
1. Remarques à l’attention de l’utilisateur
2. Consignes de sécurité
3. Fourniture
4. Description de l’appareil
5. Indications générales
6. Conditions d’environnement
7. Indication des valeurs électriques
8. Mesure avec le BENNING CM 9
9. Entretien
10. Information sur l’environnement
1. Remarques à l’attention de l’utilisateur
Cette notice d’emploi s’adresse aux
- électrotechniciens et
- personnes instruites dans le domaine électrotechnique
Le BENNING CM 9 est conçu pour effectuer des mesures dans un environne-
ment sec. Il ne doit pas être utilisé dans des circuits dont la tension nominale est
supérieure à 300 V CA (pour de plus amples informations, consulter la section «
Conditions d’environnement »).
Les symboles suivants sont utilisés dans cette notice d’emploi et sur le
BENNING CM 9 :
Permet le déplacement et l’application autours d’un conducteur actif
non isolé.
Attention ! Danger électrique !
Se trouve devant les remarques devant être respectées afin d‘éviter
tout risque pour les personnes.
Attention ! Se conformer à la documentation !
Ce symbole indique qu‘il faut tenir compte des remarques contenues
dans cette notice d‘emploi pour éviter les risques.
Ce symbole sur le BENNING CM 9 signifie que le BENNING CM 9 est
doté d‘une isolation double (classe de protection II).
Ce symbole apparaît sur l‘affichage indiquant que la batterie est dé
-
chargée.
(CA) Tension alternative ou courant alternatif.
Terre (tension à la terre).