Bennett Read ONE 114 R, User Manual

Page: 14 / 28

OPERATING INSTRUCTIONS CONTINUED
12
WET SPILL VACUUMING
Your BENNETT READ ONE is designed to handle wet spills that may occur in your home. These could
include the aftermath of a rain storm, burst geysers or spilled liquids in your home. In the event of a wet
spill in your home, your BENNETT READ ONE can be used to remove liquids from surfaces, as long
as you use it in accordance with the warnings listed at the front of this guide.
Use the following steps to convert your BENNETT READ ONE from dry vacuuming to wet vacuuming.
Do not use your BENNETT READ ONE to vacuum any hazardous liquids. These include but are not limited to: flammable liquids,
boiling liquids, corrosives, acids, oil based liquids, caustic liquids, combustibles, etc.
WARNING:
Undo securing clips (5) on the sides
of the unit
Lift the motor (7) unit from the dirt
collection tank (6)
Remove the microparticle filter by turning filter securing lock (15)
anticlockwise and pulling outwards
1 2
4
3
5
Remove high-efficiency dirt filter bag (13)
by turning the connector anticlockwise
Replace the microparticle filter with the sponge filter (17)